Skip to content
Kismet Bottom Paint Job

Boat Yard Blues – Part Two

I am truly in the swing of things on day two in the boat yard. The good news is the On & Off product helped de-wax the hull, one of the steps needed to properly prepare the hull for bottom paint. Next, I applied acetone to the hull to assure that all wax, from when the hull came out of the mold, was completely gone. After a good washing, I taped the hull off an inch below the boot stripe then applied a very light 220 grit scuffing followed by a final washing in preparation for the painting, which I…

Read more
Back To Top