Family

Family Boating – The Next Generation Takes the Helm

Boating Provided Great Memories for Our Family – When our three sons were barely teenagers, Jim and I bought our first boat together. The configurations and possibilities seemed endless when we started our search for a used boat for our family. I had one requirement, it had to have a v-berth for overnighters. It didn’t take long to settle on a used, red (of course), 21-ft. Four Winns Sundowner. We did a lot with that boat on Grand Traverse Bay; the boys loved to ski and swim behind the boat. We even did a few overnighters with them at local festivals. Jim…

Read more
snowboaters

Snowboaters Paradise – Kismet Featured in Southern Boating Magazine!

Call us Snowboaters or Boaterhomers – Using Our Boat On Land And Water! – We're certain you've heard of the term "Snow Birds." Southern Boating just coined a new boating-related term for what the crew of Kismet has been doing for over seven years. "Snowboaters!" We also like to reference our over-land adventures by saying we are "Boaterhomers." Whatever the term you use to describe what we do regularly, as a lifestyle choice, it's working for us in a big way. Using our trailerable boat as both a land vehicle and a water vessel provides us with some amazing flexibility in…

Read more
Christening Kismet

Today We Come to Name this Lady… Kismet

Christening Kismet – Christening is a Ritual Started by Seafarers Thousands of Years Ago – We finally got the boat graphics installed on Kismet – time to christen her. Christening, or naming ceremonies, were meant to bring good luck to new vessels and those who sailed on them. The tradition of christening goes back to the early days of boating – thousands of years ago. Viking ships were marked by the spilling of blood in early rituals. In the Middle Ages, religious shrines were placed on ships and a libation of wine was offered as the vessel hit the water. Wine became a substitute…

Read more
Cross-Country

Delving Into the Oversize Load Permit Process – DIY to Save Money!

We Decided to Secure the Oversize Load Permits Ourselves – There are many things in life I enjoy, two of those things are saving money and learning. In this spirit, I forged ahead with the Oversize Load permit process one has to go through when traveling on highways with an oversized load. I looked forward to learning how it works, as well as saving money by doing it myself.  If you are trailering a load, that is wider than 8 1/2 feet, you have to get an oversize/wide load permit from every state and each Canadian Provence you’ll be traveling…

Read more
Loading Kismet

A Little Apprehension Loading Kismet for Her First Cross-Country Trek

Heading Back to Des Moines Where We Will Be Loading Kismet Onto its Trailer for the First Time. Apprehension is defined in Webster's Dictionary as "anxiety or fear that something bad or unpleasant will happen.” As our time in the Pacific Northwest was coming to an end, I was beginning to feel a little uneasy about trailering our new boat cross-country. The new Ranger Tug R29S is two feet longer, one and one-half feet wider, a little taller, and a couple of thousand pounds heavier than our previous R27. I've been known to worry a lot when faced with something new…

Read more
Bell Harbor

Saving the Best for Last… Bell Harbor Marina – Seattle, Washington

PNW Operation Completed at Bell Harbor Marina – Seattle, Washington – Having concluded our mission to first… take possession of our new Ranger Tug R29S, spend a week cruising with our grandson on board, attend a fabulous Ranger Tug Rendezvous in Roche Harbor and explore South Puget Sound. All this along with returning to a few favorites in the sound and the San Juan Islands, we are winding down our end of summer and early fall, cruising time in the Pacific Northwest, with the last stop at Bell Harbor Marina in downtown Seattle, Washington. Without a doubt, we would have…

Read more
Blake Island

Blake Island Overlooks Seattle, Washington

Blake Island is a Marine State Park in Puget Sound, Southwest of Seattle Before we leave the Pacific Northwest to put an end to our fall boating cruise in the new Ranger Tug, we had to fit in a stop in downtown Seattle. But first, we wanted to linger and enjoy a few of our favorites in Puget Sound – Blake Island and Eagle Harbor. We also wanted to spend a few days in Lake Union and Lake Washington with a short stop at Fishermen's Terminal, on the way to Bell Harbor in Seattle, to visit with friends. Blake Island…

Read more

Saying Goodbye is Hard to Do!

The reality of Life Does Not Stop When You Board a Boat and Take Off for Ports Unknown – The real world will eventually catch up and find us. Such is what happened during our 2017 Puget Sound cruise. My brother, Ken Targal passed away after a long battle with cancer – too soon. We took a time out and flew back to Michigan to be with family for a few days. Ken was a boater, he loved to be on the water as much as Jim and I do. We were raised on summer visits to a family cottage…

Read more
San Juan Islands Sucia Island

Island in the Sun – Sucia Island, San Juan Islands, Washington

Sucia Island Marina State Park – As long-distance cruisers, we are routinely motivated by an appetite to explore the unknown. We push ourselves to seek out that which we have not yet seen, filling in with returns to some of our favorite finds. Sucia Island is one of those "return" places for us – this being our third visit to this horseshoe-shaped island refuge. We still remember the first time we set foot on this island paradise with its natural sandstone caves. The park includes 564 acres of parkland with over 77,000 feet of shoreline Spanish explorers, circa 1781, called…

Read more
Cruise To Margaritaville

How Do You Say Thank You?

If you are Fluid Motion, the parent company of Ranger Tugs and Cutwater Boats, you hold the largest “Thank You Rendezvous” the boating community has ever seen! – We attended our first Ranger Tugs Rendezvous in August of 2011, just after taking delivery of our 2012 Ranger R27. At that time it was organized by the owners and supported by the Factory. It was held in Bremerton Washington that year and attended by approximately 68 boats and over a hundred owners. It was a fun event, “Parrotville Party” was the theme that year, very similar to this year's theme, “Cruise to…

Read more
Port Madison

A Gem of an Anchorage – Port Madison, WA

Port Madison is One of Our Favorite Anchorages in the Puget Sound Area! – Still getting to know our new Kismet. Our first get-a-way after we dropped our grandson Silas off with his parents was to return to Port Madison, Washington. Located east of the Olympic Peninsula, at Bainbridge Island, We first visited this anchorage in 2012 soon after we took possession of our then Ranger Tugs R27. So we thought it would be appropriate to make a return visit with the new and improved R29. We are headed north of Puget Sound now, anchoring out as we make our way…

Read more
Tacoma

Out of the Wild and Into City Life – Tacoma, WA

Lots to do with Silas in Tacoma! – By Thursday, knowing that Silas would be ready to burn up some pent-up energy, we headed to Dock Street Marina in Tacoma. Just cruising into the busy port gave Silas some maritime visual stimulation. He asked lots of questions about his surroundings at the busy marina – all day long. After docking, we gathered up the accumulated garbage bags to dispose of and walked a short distance into town. One nice thing about Dock Street Marina is its close proximity to a fairly vibrant harbor town. We wanted to take Silas to…

Read more
Silas Onboard

Silas Onboard Kismet – Penrose Point State Park and Filucy Bay

We've Waited a Long Time to Have Silas Onboard for a Weeklong Adventure! – Monday afternoon, Lisa, Silas, and I waved goodbye from shore to Ross and Hadley and headed back to the boat. To see the wonderment in Silas’ eyes, as we departed Gig Harbor, brought back memories of when I was a child spending time on the water in a boat. From Gig Harbor we cruised through the Narrows into Hale Passage en route to Penrose Point State Park, off Carr Inlet. We have never cruised much in South Sound, except for one trip to Gig Harbor in…

Read more
Silas First Boating Adventure

Silas First Boating Adventure – Gig Harbor

Our First Guest on Our New Ranger Tug, Kismet! – It is often said that people are a “product of their environment.” We had our grandson, Silas, on his first boat ride, in 2013, before he was a week old. Since that day, we’ve had a few boat rides with him, his parents, and recently minted sister, Hadley. As he is now almost four years old, we thought it was time to immerse him in our boating lifestyle. So we invited him to join us for – Silas' first boating adventure – a week-long cruise in South Puget Sound, Washington…

Read more
Ranger Tugs R29S Kismet Orientation

Ranger Tugs Gives Orientation on Volvo Penta D4-300

Kenny Marrs met us at the boat early in the morning of day two of our orientation. He would be covering the Volvo Penta D4-300 engine operations, Garmin electronics, dinghy deployment and retrieval, and much more. We’ve known Kenny from the beginning of our Ranger Tugs association, a nicer young man than you will ever meet. We have seen Kenny in action, his dedication to his customers' needs is intuitive and honest. Thanks again, Kenny!

Read more
Ranger Tugs R29S Kismet Orientation

Ranger Tugs R29S Kismet Orientation Day

Even Experienced Boaters Need Help Sometimes! – Because of our many years of boating experience (six of those years on a Ranger Tug), we didn’t feel we needed to have the “New Boat Delivery Experience” provided by Ranger Tugs when we took possession of our new Ranger Tug R29S – but, they insisted. Boy, were we wrong! Way wrong! We have been avid boaters for almost all of our adult lives. In all the new boat purchases we’ve made we’ve never, ever, EVER had such a thorough and rewarding new delivery experience as we recently had when taking delivery of…

Read more
packing

Insights Into Jim’s Packing Science

Packing for a Cross Country Trip is Like Preparing for a Marathon Getting ready for a cross-country trip requires some mental gymnastics! We’ve only got one shot to pack up the truck before we head west. Better to be well-organized from the start. We knew it was going to be tight, especially since we were taking a few containers of personal items to our son, Ross, and his family, who live in Portland, OR. We actually started the packing process back in April when we unloaded the contents, of our sold Ranger Tugs R27, from our truck into the garage…

Read more
Kismet Ranger Tugs R29S

Ready and Waiting at the Factory – Kismet a Ranger Tug R29S

When does a boat become a boat? My thoughts are... “when it is ready to float and cruise!” Based on the final assembly production photos we just received from the factory, it appears Kismet, a Ranger Tug R29S, is ready to become a boat. The Ranger Tug R29S sports a larger head than our R27. There will also be more privacy with the head being positioned in the stateroom. The stateroom is a step up for us, having slept on a V-berth for the last six years on the R27. We are also loving the spacious under-bed storage area. There will be plenty…

Read more
2017 Ranger Tugs Charlevoix Rendezvous

Own a Ranger Tug or Cutwater Boat? Add to Your Cruising Calendar!

Come One, Come All! Own a Ranger Tug or Cutwater Boat? 2018 Great Lakes Area Ranger Tugs and Cutwater Boats Summer Rendezvous Orillia, Ontario – Canada on the Trent Severn Waterway Tentative Dates:  August 17 – 19th – Since 2014, the Great Lakes Area Rendezvous has moved to different areas on, or near, the Great Lakes. This way, we can explore different ports. Last year's event was held on Round Lake in Charlevoix, Michigan. This years planned rendezvous will be held in the beautiful Trent Severn Waterway. A must-see boating destination for any serious cruiser. Check Out Last Year's Event..…

Read more
Kismet Ranger Tugs R-29S

Construction of the New Kismet Ranger Tugs R29S

Marrying the Hull of the New Kismet Ranger Tugs R29S Having something built from scratch, such as a house, car, or in this case, a boat is usually best left to the professionals. As you’ll see from the following photos there is evidence that a tremendous amount of thought and mindful design goes into building a boat, before and during manufacturing. There is a coordinated effort, before the actual production starts, to have on hand all of the hardware, wiring, hoses, batteries, glass, lighting, engine, generator, electronics, solar panel, seating cushions, tanks, etc. This ensures production occurs smoothly and on…

Read more
Ranger Tug Kismet

Construction of the NEW KISMET!

UPDATE on the NEW KISMET! Having sold our Ranger Tug R27 a few months ago, we ordered a Ranger Tug R29S, we'll take delivery of our new Kismet in August 2017. So, we are spending the summer boatless! Lots to do at home while we prepare to travel west to Seattle, next month, to take possession. This tug, with a sportier look and a Volvo Penta diesel engine, will take us to some exciting cruising destinations with a quieter, more stable ride. Our new tug will be just a little bit bigger, but still trailerable. Yes, Kismet will look good again in that…

Read more
Echo Bay

Pierre’s Echo Bay – A Distinct Nordic Jewel in the Broughton Islands

Pierre's Echo Bay Lodge and Marina is Famous for Their Nordic Themed Feasts – Less than 2 miles away from the previous night's anchorage in Shoal Bay sits Pierre’s Echo Bay Lodge and Marina. We arrived early morning for a 2-day stay. Before making our way to our assigned slip, we stopped at the fuel dock to top off our tank. This is a chore we prefer to do on the way into a marina. That way, when we leave early morning, we don't have to wait in line at the fuel dock. After coming out of the wild, with several days spent watching for bears, whales,…

Read more
Burdwood Group

Lunch Stop – Burdwood Group – Broughton Islands, BC

Burdwood Group – A cluster of low-lying islands – One of the interesting features of the Burdwood Group Islands is the white-shell beaches. This grouping includes Denham Island, Walker Islet, and a few other unnamed islands and islets. We stopped for lunch during our day-long exploration on our way to Shoal Harbour. The surroundings were amazing, almost dreamlike with pointy islands all around. It helped that it was an extremely calm day with glassy water below us reflecting the mounds of islands nearby. Above us, the sky was intensely blue at the height of the day, we felt saturated in warm color and dreaminess. It felt…

Read more
Simoon Sound

Peace and Quiet in Simoon Sound – Broughton Islands, Canada

Simoon Sound – A Sure Thing for a Bear Sighting We left Kwatsi Bay late morning to head back west into Tribune Channel and eventually Simoon Sound. First, we wanted to explore the length of Tribune Channel while also looking out for a spot to anchor for the night. Our preferred choice was Macintosh Bay, but the best spot was taken. We proceeded further back into O’Brien Bay and found a nice spot in the north corner of the bay with a good view of the level shoreline and a wide open beach area where we hoped to have a black bear sighting…

Read more
return visit Kwatsi Bay Marina

Can’t Get Enough of These Floating Marinas – Return Visit Kwatsi Bay Marina, Broughton Islands, BC Canada

Return Visit Kwatsi Bay Marina More fog greeted us this morning. We watched it slowly roll into Viner Sound the night before. Never have seen this much fog in our lives! So, today was another exploration cruising day. We enjoy poking into little coves, around islands, up bays, rivers, or sounds, just to see what's there. It must be the inquisitive nature and wanderlust in our blood and our ongoing desire to see as much of the Broughtons as we can this summer. Our end goal today is a return visit to Kwatsi Bay Marina. Soon after we departed Viner Sound, we…

Read more
Back To Top